The characteristics and maintenance of automobile brake tube?

Classification Of Brake Hoses

According to the different forms of automobile braking, it is divided into hydraulic brake hose, pneumatic brake hose and vacuum brake hose. According to its different materials are divided into rubber brake hose and nylon brake hose.

Advantages And Disadvantages Of Brake Hoses

Rubber brake hose has the advantages of strong tensile resistance and easy installation, but the disadvantages are long time use and easy aging of the surface.
Nylon brake hose has the advantages of anti-aging and corrosion resistance. The disadvantage is that in the case of low temperature, the tensile ability is weakened, such as being impacted by external force, and it is easy to break.

Maintenance Of Brake Hose

Brake hose is an important part to ensure the safety of vehicles, everyone using cars should pay special attention to the usual maintenance and inspection. In peacetime should pay attention to the following points:

1. Check the brake hose regularly to keep the surface of the brake hose clean and avoid corrosion.
2. Avoid pulling brake hose by external force.
3. Frequently check the brake hose joint is loose and loose sealing phenomenon.
4. If the brake hose used for a long time is found to be aging, loosely sealed or scratched, it should be replaced in time.

Influence Of Brake Hose Failure On Brake System

If the content of the brake hose increases, the brake system of the car will lag behind.
If it ruptures, it will disable the braking system.
Failure to brake can occur if the brake hose is blocked.

Why Are Brake Hoses Not Made Of Metal

The brake hose is not made of metal because the wheel can fluctuate up and down according to the road condition, and the front wheel can turn left and right, so it must be connected by hose. The metal tube is unfluctuating and easy to break.
So metal is usually not used.