kia Rio Car Engine System Fuel Nozzle Parts OEM 33800-2F000

When the pressure of fuel oil in the oil chamber is higher than the set value, the valve opens, the fuel through the nozzle cap, valve consists of body, seat and spring, seat back end connected to the cavity formation oil cavity, cavity sets into the oil cavity entryway, spring is located in the oil chamber, and between the valve body and seat to close the valve, the seat of the front end connected to the nozzle cap formation residual volume, nozzle cap has connected to the residual volume spray holes.A new structural fuel nozzle for pulse fuel pump in electronic fuel injection system.It has the advantages of small size, simple structure, low manufacturing cost and convenient setting of injection direction.

Fuel nozzle is a special nozzle for atomizing fuel, which can produce hollow and solid spray shape.Generally there are 30, 45, 60, 80 degree spray Angle.When studying the flow and Angle parameters of this type of nozzle, the viscosity and density should be considered generally.Working pressure in commonly 7 to 10 kg/cm2, flow in terms of L/h, the different spray nozzle according to the different configuration of the corresponding type of flow oil screen, traffic from 1.5 L to 1.7 L/h 45 micron molten copper oil screen configuration, flow during 1.89 3.78 L configuration 75 microns molten copper oil screen, flow in 4.76 to 5.10 L/h when molten copper oil screen configuration 125 microns, flow in 5.68 to 41.64 L/h time configuration 140 microns not mixed ears alloy net, flow rate at the time of more than 45.42 L/h configuration oil screen.